We are a manufacturer of children's play equipment in trichy. Kollapatti persons are If you need it, please contact me 6369233020, 9360484806 EVA (Ethylene‑Vinyl Acetate) – Material Specification Parameter Typical Values / Requirement Remarks Composition Copolymer of Ethylene + Vinyl Acetate (VA) VA% governs softness / flexibility. More VA → softer. VA Content Typically ~ 10‑40% Can be tailored depending on hardness needed. Density ~ 25 to 180 kg/m³ depending on grade Lower densities → softer, lighter. Higher density → more rigid / supportive. Hardness Measured on Shore C (or sometimes Shore A) scale. Typical: 25‑65 Shore C, also custom ranges. Depending on application (toy, mat, padding, etc.). Sheet / Board / Roll Thickness From <1mm up to ~30‑40 mm or more for some boards For play‑mats usually ~5‑20 mm. Dimensions / Sizes Sheets like 1000‑2000 mm wide and lengths variable; rolls also possible; boards up to ~2000 x 1000 mm etc. Custom sizes available. Water Absorption / Moisture Resistance Very low; closed‑cell structure resists water; absorption often <1% or <0.01% depending on spec. EVA Foam +2 sansd-eva.en.made-in-china.com +2 Good for indoor mats, toys; dries quickly and doesn’t stay damp. Thermal Properties Can handle moderate temperature ranges; lower softening point than some plastics; good insulation (heat and cold) due to closed‑cell foam. Extreme cold or heat may deform or soften. Dimensional Stability Contraction % typically small (few percent) after production; compressive strength varies. Needs to maintain shape under load. Durability / Flex / Compression Recovery Resilient; good recovery from compression; resistant to repeated deformation. isolon.lv +2 Hipex Group +2 For mats or pads, repeated use should not permanently deform. Safety / Toxicity Non‑toxic if using good grade EVA; often compliant with toy safety standards when free of harmful additives. Absence of phthalates, heavy metals etc. is important. Flame / Fire Behavior Not highly flame resistant; closed‑cell foam can burn; depending on grade might meet certain flame retardancy standards. If used in toys, must comply with local fire safety where applicable. Surface Finish / Appearance Smooth; available in many colors; may be embossed, printed, laminated. isolon.Customization possible. Odor / Smell New EVA may have mild odor; proper curing & ventilation reduces it.
This is your website preview.
Currently it only shows your basic business info. Start adding relevant business details such as description, images and products or services to gain your customers attention by using Boost 360 android app / iOS App / web portal.
KIDS PLAY INDOOR GAME - DEIVA ENTERPRISES
2025-09-15T05:18:26
We are a manufacturer of children's play equipment in trichy. Kollapatti persons are If you need it, please contact me 6369233020, 9360484806 EVA (Ethylene‑Vinyl Acetate) – Material Specification Parameter Typical Values / Requirement Remarks Composition Copolymer of Ethylene + Vinyl Acetate (VA) VA% governs softness / flexibility. More VA → softer. VA Content Typically ~ 10‑40% Can be tailored depending on hardness needed. Density ~ 25 to 180 kg/m³ depending on grade Lower densities → softer, lighter. Higher density → more rigid / supportive. Hardness Measured on Shore C (or sometimes Shore A) scale. Typical: 25‑65 Shore C, also custom ranges. Depending on application (toy, mat, padding, etc.). Sheet / Board / Roll Thickness From <1mm up to ~30‑40 mm or more for some boards For play‑mats usually ~5‑20 mm. Dimensions / Sizes Sheets like 1000‑2000 mm wide and lengths variable; rolls also possible; boards up to ~2000 x 1000 mm etc. Custom sizes available. Water Absorption / Moisture Resistance Very low; closed‑cell structure resists water; absorption often <1% or <0.01% depending on spec. EVA Foam +2 sansd-eva.en.made-in-china.com +2 Good for indoor mats, toys; dries quickly and doesn’t stay damp. Thermal Properties Can handle moderate temperature ranges; lower softening point than some plastics; good insulation (heat and cold) due to closed‑cell foam. Extreme cold or heat may deform or soften. Dimensional Stability Contraction % typically small (few percent) after production; compressive strength varies. Needs to maintain shape under load. Durability / Flex / Compression Recovery Resilient; good recovery from compression; resistant to repeated deformation. isolon.lv +2 Hipex Group +2 For mats or pads, repeated use should not permanently deform. Safety / Toxicity Non‑toxic if using good grade EVA; often compliant with toy safety standards when free of harmful additives. Absence of phthalates, heavy metals etc. is important. Flame / Fire Behavior Not highly flame resistant; closed‑cell foam can burn; depending on grade might meet certain flame retardancy standards. If used in toys, must comply with local fire safety where applicable. Surface Finish / Appearance Smooth; available in many colors; may be embossed, printed, laminated. isolon.Customization possible. Odor / Smell New EVA may have mild odor; proper curing & ventilation reduces it.
2025-09-15T05:18:26
Submit Your Enquiry